MEP BIM Modeling Services
— USA-Based • PE-Led —
Accurate, constructible, and coordination-ready BIM models for Mechanical, Plumbing, HVAC, and Fire Protection contractors across the USA.
Fast turnaround. Fabrication-ready deliverables. No offshore outsourcing.
Why Contractors Choose Advantage Engineering Technologies
U.S.-Based, PE-Led BIM Firm
All modeling and coordination work is performed in the USA by a licensed Professional Engineer (NY, NJ, ME). No offshore outsourcing, no communication delays, no quality surprises.
Built for Mechanical, Plumbing & HVAC Contractors
We understand contractor workflows, submittal requirements, fabrication constraints, and field installation realities.
Fabrication-Ready Deliverables
We produce detailed, constructible models and shop drawings that reduce RFIs, prevent clashes, and accelerate installation.
Fast Turnaround & Clear Communication
We deliver on contractor timelines — because delays cost money. You get responsive communication, daily updates, and predictable delivery.
LOD 300–500 Modeling
We deliver models at the exact Level of Development required for coordination, fabrication, and installation.
Our MEP BIM Modeling Services
Mechanical (HVAC) BIM Modeling
- LOD 300–500 HVAC system modeling
- Ductwork modeling with fittings, transitions, and accessories
- Mechanical room BIM modeling
- Equipment modeling with manufacturer-accurate dimensions
- Duct fabrication drawings
- Coordination with structural, architectural, and plumbing systems
- Revit 2023/2024/2025 support
Plumbing BIM Modeling
- Domestic water, sanitary, vent, storm, and specialty piping
- LOD 300–500 plumbing system modeling
- Fixture rough-ins and equipment connections
- Gravity piping coordination
- Isometric views and spool-ready layouts
- Clash detection and resolution
Mechanical Piping BIM Modeling
- Chilled water, heating hot water, condenser water, and process piping
- LOD 300–500 piping models
- Pipe spool drawings (spool maps + spool piece drawings)
- Hanger and support modeling
- Equipment connections and valve assemblies
- Fabrication-ready deliverables for pipe shops
Fire Protection BIM Modeling
- Wet, dry, and pre-action systems
- LOD 300–500 sprinkler layouts
- Riser rooms and pump rooms
- Coordination with ceilings, structure, and MEP systems
- Hanger and seismic bracing modeling
We help you reduce field rework and accelerate installation.
MEP Coordination Services
We provide full coordination services for Mechanical, Plumbing, HVAC, and Fire Protection systems.
Deliverables Include:
- Coordinated 3D models
- Clash detection reports
- Navisworks coordination files
- Coordination meeting support
- Updated models after each clash meeting
- Final coordination sign-off package
Shop Drawings & Fabrication Packages
We specialize in contractor-ready deliverables:
HVAC Shop Drawings
- Duct fabrication drawings
- Section views, elevations, and details
- Hanger layouts
- Equipment connections
Piping Shop Drawings
- Pipe spool drawings
- Spool maps
- Valve assemblies
- Hanger and support layouts
Industries We Serve
Commercial Buildings
High-rise residential
Hospitals & healthcare
Schools & universities
Industrial & manufacturing
Government & municipal buildings
Pharmaceutical & clean rooms
Hotels & hospitality
Retail & mixed-use
Our 3-Step Process
Receive Contract Drawings & Scope
You send us architectural, structural, mechanical, and plumbing drawings.
We Build the BIM Model (LOD 300–500)
We model all systems accurately and coordinate with other trades.
Deliver Fabrication-Ready Drawings
You receive coordinated models, shop drawings, spool sheets, and installation-ready documentation.
Software Expertise
- Revit MEP (2023–2025)
- AutoCAD MEP
- Navisworks Manage
- BIM 360 / ACC
- SolidWorks & ANSYS for product modeling and FEA
About Advantage Engineering Technologies
We are a U.S.-based engineering firm specializing in BIM modeling, coordination, and fabrication-ready deliverables for mechanical, plumbing, HVAC, and fire protection contractors. Led by a licensed Professional Engineer, we deliver accurate, constructible models with fast turnaround and clear communication.
MEP BIM Modeling Services — Frequently Asked Questions
We provide fully detailed BIM models for Mechanical, Plumbing, HVAC, and Fire Protection systems. This includes ductwork, hydronic piping, domestic water, sanitary, gas, medical gas, equipment layouts, hangers, supports, and specialty systems required for coordination and fabrication.
Yes. Contractors are our primary clients. Our workflow, deliverables, and communication style are built specifically around the needs of commercial and industrial MEP contractors who require accurate, constructible, and coordination‑ready models.
We primarily work in Autodesk Revit for BIM modeling and Navisworks for clash detection and coordination. We can also deliver in DWG, IFC, STEP, or other formats depending on your project requirements.
We can work from PDFs, CAD files, Revit models, point clouds, or a combination of all four. If only PDFs are available, we reconstruct the model with contractor‑grade accuracy using your specs, submittals, and equipment data.
Yes. We run clash detection in Navisworks, resolve conflicts with other trades, and update the model until it is fully coordination‑ready. If you already have a coordination lead, we integrate seamlessly into their workflow.
Absolutely. We can produce fabrication‑level models, including spool drawings, hanger layouts, equipment pads, and field‑ready installation sheets. Deliverables are tailored to your fabrication shop and field installation needs.
Turnaround depends on project size, but most contractor‑level modeling packages are delivered within 5–15 business days. Rush projects are available when needed.
Yes. We frequently step into active coordination cycles. We can clean up existing models, correct geometry, resolve clashes, and bring your trade up to the level required for sign‑off.
At minimum:
- Architectural backgrounds
- MEP design drawings or PDFs
- Equipment submittals
- Project standards (LOD, naming, file structure)
- Any existing Revit or CAD files
If you don’t have all of these, we’ll work with what’s available and fill in gaps as needed.
Yes. As a licensed Professional Engineer (PE), we can provide PE‑reviewed and stamped drawings when included in our project scope and jurisdiction.
You can request a quote directly through our website. Upload your drawings, describe your scope, and we’ll provide a detailed proposal with pricing, timeline, and deliverables. Or just give is a call first if you have any questions (518) 320-2501.