MEP Coordination Drawings
USA Based • PE Led • Contractor Focused
Advantage Engineering Technologies provides MEP coordination drawing services for mechanical, plumbing, electrical, and fire protection contractors across the United States. Our coordination packages are built for field installation, clash resolution, and trade alignment — not just BIM meetings. Every deliverable is produced in the USA by a licensed Professional Engineer.
Accurate, clash‑free, installation‑ready MEP coordination drawings for commercial, industrial, and institutional projects. Fast turnaround. Zero‑conflict deliverables. No offshore outsourcing.
Why Contractors Choose Our MEP Coordination Drawing Services
U.S.-Based, PE-Led Coordination Team
All MEP coordination work is performed in the United States by a licensed Professional Engineer (NY, NJ, ME).
No offshore outsourcing. No communication delays. No quality surprises.
Built for Field Installation — Not Just BIM
Our coordination drawings are created specifically for:
- Mechanical contractors
- Plumbing contractors
- Electrical contractors
- Fire protection contractors
- General contractors and CM teams
- Field installation workflows
- Submittal and shop drawing requirements
We understand:
- Tight ceiling plenums
- Beam and joist conflicts
- Shaft congestion
- Equipment access requirements
- Sleeve and penetration alignment
- Hanger spacing and support requirements
- Field installation workflows
Your drawings are built to install, not just to pass a BIM meeting.
Fabrication Ready, Field Ready Coordination Packages
Our coordination drawings help contractors:
- Eliminate field conflicts
- Reduce RFIs
- Prevent rework and delays
- Improve installation sequencing
- Support prefabrication
- Reduce labor hours
- Improve inspection and turnover documentation
What Are MEP Coordination Drawings?
MEP coordination drawings are the final, signed‑off, clash‑free drawings produced after all trades have coordinated their systems in a 3D BIM environment.
These drawings show:
- Exact routing of ductwork, piping, and conduit
- Final elevations and offsets
- Hanger and support locations
- Sleeve and penetration locations
- Equipment access clearances
- Trade by trade installation order
- Field verified dimensions
They are the documents your field team installs from — the final output of the coordination process.
MEP Coordination Drawing Services
Clash Detection & Resolution
We run full clash detection for:
- Mechanical
- Plumbing
- Electrical
- Fire protection
- Structural
- Architectural
We resolve:
- Beam conflicts
- Ceiling height issues
- Shaft congestion
- Equipment access issues
- Trade to trade collisions
- Routing conflicts
Weekly Coordination Meetings
We participate in:
- Weekly clash resolution meetings
- Trade by trade coordination sessions
- GC/CM coordination reviews
- Model update cycles
We can also take the lead:
Our Professional Engineer is qualified to run weekly coordination meetings — a requirement often included in mechanical contractor scopes.
If included in our scope, we take ownership of the coordination process and provide updated models and a detailed summary after every meeting. This removes the burden from your team so you can focus on your core business.
We maintain version control throughout the coordination process to ensure all trades are working from the latest approved model.
Final Coordination Drawings (Signed Off)
We produce:
- Fully coordinated plan views
- Elevations and sections
- Dimensioned routing
- Final elevations and offsets
- Access and maintenance clearances
- Equipment connection details
These are the drawings your foremen and installers use in the field.
Hanger & Support Layouts
We provide:
- Hanger spacing per spec
- Rod lengths
- Unistrut and trapeze layouts
- Structural attachment points
- Coordination with other trades’ hangers
We coordinate hanger spacing, rod lengths, and structural attachment points across all trades to prevent conflicts between duct, pipe, and conduit supports
Sleeve & Penetration Drawings
We deliver:
- Wall and floor penetration layouts
- Deck penetration plans
- Shaft coordination
- Firestopping notes (if required)
- Sleeve sizes and elevations
These drawings prevent field cutting and slab damage.
Installation Sequencing Drawings
We show:
- Which trade installs first
- Routing priority (Long-pitched gravity pipes and large ductwork first, then plumbing and mechanical pressure pipes, then electrical and fire protection)
- In-Deck hanger inserts
- Access requirements
- Equipment set in place order
This reduces jobsite friction and improves labor efficiency.
As Built Coordination Updates (If Required)
We update drawings based on:
- Field changes
- RFI responses
- Equipment substitutions
- Architectural revisions
MEP Contractor Pain Points We Solve
Tight Ceiling Plenums
We coordinate realistic routing to avoid conflicts with:
- Lighting
- Sprinklers
- Beams
- Cable trays
- Ceiling systems
Trade to Trade Conflicts
We eliminate:
- Duct vs. pipe conflicts
- Pipe vs. conduit conflicts
- Conduit vs. structure conflicts
- Access clearance issues
- Ceiling systems
Inaccurate Sleeve Layouts
We ensure:
- Correct sleeve sizes
- Proper elevations
- Alignment across trades
- No field drilling or slab cutting
Equipment Access & Maintenance
We maintain access for:
- VAV boxes
- Valves
- Dampers
- Panels
- Pumps
- Chillers
- Cooling towers
- Electrical gear
Field Rework & Delays
Our coordination drawings reduce:
- Change orders
- Rerouting
- Labor overruns
- Scrap materials
- Schedule impacts
Industries We Serve
Commercial Buildings
High-rise residential
Hospitals & healthcare
Schools & universities
Industrial & manufacturing
Government & municipal buildings
Pharmaceutical & clean rooms
Hotels & hospitality
Retail & mixed-use
Our 3 Step MEP Coordination Drawing Process
Receive Contract Drawings & BIM Models
You send architectural, structural, and MEP drawings, equipment submittals, and project standards.
Coordinate All MEP Trades in 3D
We run clash detection, resolve conflicts, update models, and participate in weekly coordination meetings.
Deliver Final Coordination Drawings
You receive: • Signed off coordination drawings • Sleeve and penetration drawings • Hanger layouts • Installation sequencing drawings • Field ready documentation
Software Expertise
- Revit MEP (2023–2025)
- AutoCAD MEP
- Navisworks Manage
- BIM 360 / ACC
- SolidWorks & ANSYS (for equipment modeling)
About Advantage Engineering Technologies
We are a U.S.-based engineering firm specializing in MEP coordination drawings, MEP BIM modeling, and fabrication‑ready deliverables for mechanical, plumbing, electrical, and fire protection contractors.
Led by a licensed Professional Engineer, we deliver accurate, constructible, clash‑free coordination packages with fast turnaround and clear communication.
Our MEP coordination team supports projects of all sizes — from tenant fit‑outs to hospitals, universities, and industrial facilities. If you need accurate, clash‑free, installation‑ready coordination drawings delivered on contractor timelines, we’re ready to help.